I just replaced my tires last month. Well, sort of.

The client in question, did replace the tires on this month, but it was 3 years ago this month. Time just zips by, and I have this happen to many clients, they lose track of when they last visited the shop. That is why we mail out reminders to clients, so they come in for service regularly.

I see 4 to 5 cars a week that need tires. So why do drivers wait till the tire fails? Why wait till you are on the side of the road.

I blame it on an old school idea, the myth is that Abraham Lincoln’s head is a good judge of tread depth. In the last couple years I have seen many automotive articles on tire wear and when it’s time to replace the worn out rubber.

When you use a penny to judge the tread depth, you are waiting too long to replace your tires. Waiting till your tires are at 2/32″ of an inch to replace them puts you at risk of hydroplaning in wet conditions.

Hydroplaning; “Verb”  To slide uncontrollably on the wet surface of a road : a motorist whose car hydroplaned and crashed into a tree.

Many tires may still have tread in the center, but may be worn at the edge, or worse. Your tires could be age cracked, or have cuts on the side wall from hitting curbs.   You must look at the condition of the entire tire, not just the thread thickness.

I know, I live in Arizona. It never rains in Arizona, right? Well the fact is, yes, it does rain in Arizona just not very often. But when it does rain, all the oil in the road rises to the top of the wet surface. That makes the road very slick. Any tire at 2/32″ of an inch will slip, slide and lose traction very easy in that type of wet condition.

So I like to use a Quarter, I keep one in my pocket to show clients how important thickness is when the road is wet. A Quarter will give you 4/32″ or 1/8 th of an inch of tread thickness. I use 4/32″ of an inch as a guideline for tire wear. Many tests have shown that tires worn to 4/32″ of an inch will still grip the wet road and bring your car to a safe stop.

The video below is showing a tire that is worn too much, it needs replacement now. If you look at the center of the tire you can see the tread is still thick enough that it could give the owner the idea the tire is still good. The client did not think the tread was that bad till I showed him up close how cracked and worn the tire was. In fact all 4 tires looked just like the one in the video clip. He only came in to get the fluids checked and the tires aired up because he was going on a trip in the morning.

So as your tire wears down below 4/32″ it will start to lose traction when the road is wet. Tests on tires looking at tire wear vs wet traction showed that at 3/32″ of an inch the wet stopping distances starts to increase by 15 to 50%.

At 2/32″ of an inch almost all the tires tested showed the cars using over double the amount of distance to stop. That is almost 100% more stopping distance needed when the road is wet. Replacing your tires at 4/32″ is a good idea. Think safety first.

By the way the client was very happy we found this before he had a break down. With 4 new tire an oil change and new wiper blades he was ready for his trip.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013