Tag Archives: ford repair phoenix 85016

Yep, it’s broken; Plastics…

Posted on by

Plastics, they don’t last forever.

Unhappy owners with broken cars arrive at my shop every month, and the owners just do not understand why the car has broken down. Well, if you drive it, it will wear out…..

Todays autos use lot’s of plastics. Auto makers have always used plastic parts, but in todays cars and trucks plastic parts are used for so many things, it can be frustrating when parts don’t last because they are made of plastic.wp-image-33241149jpg.jpg

Today I have a Nissan Frontier in the shop with a coolant leak at a plastic fitting on the heater core. This is a common thing on a vehicle that is 10 years old or older.

The hard part is informing the client that the engine is bad, because it over heated, due to a plastic part that failed. Using plastics to make a car lighter, and get better emissions is great, but at what cost to the client. I would rather have all cooling system parts made from metal. The auto maker makes the parts out of plastic because it’s cheaper to manufacture.

So what do they care if the part fails and the engine goes bad. That’s why they make new cars anyway.

Fix it right, fix it once. HeyAnthonyAz.com

D.I.Y. repairs done on the cheep?

Posted on by

I have only one issue with a car owner doing a DIY repair.

If an owner of a car is going to try doing A DIY repair, at least be honest about it when it does not turn out the way you wanted.

My only issue is when a car owner does a DIY repair and then they say that no one has been 20160830_113235_hdr.jpgworking on the car.

DIY repairs are easy to spot. It’s obvious that someone was not following a correct procedure.

Fix it right, Fix it once…

DIY repairs are fine when you use quality parts and the correct repair procedure. Short cut the repair and you are asking for trouble.

This nasty mess, in the above image is from using an aftermarket A/C service kit that included sealant. Many of the A/C service kits sold at auto parts stores, include sealants as part of the freon charge.

A/C Sealants are nasty & damage your A/C system.

Fix it right, fix it once. HeyAnthonyAz.com

Starter noises related to Bendix and flywheel ring gear tooth wear

Posted on by
20160829_090504_hdr.jpg

Bendix GM Starter

20160829_090318_hdr.jpg

GM flywheel, ring-gear

The Bendix gear on the left has a worn out shaft bushing. The flywheel on the right has 35% of its ring gear teeth damaged from miss-alignment of the gears during starter engagement.

A metallic clash / crunch noise or grinding sound may be noticed when starting an engine with parts worn like the parts in the images. A worn out starter is the most common reason you may notice a noise when starting the engine.

Ignoring grinding noises and hopping it will stop on its own is foolish. 

If you hear grinding sound when you start your engine, have it inspected right away. Replacing a worn starter is less expensive than having to replace a worn out flywheel because you waited till the engine would not start at all.

Once the teeth on the flywheel ring-gear become damaged it can lead to repetitive damage to any new starter that is installed. We do not install a starter without rotating the engine and checking all the teeth on the flywheel.

My new client had been at two other shops with his Chevy truck, and he has paid for replacing the starter 3 times over the last 18 months. The owner uses his truck for food deliveries, and engine may have up to 200 start ups a day. Upon inspecting the flywheel, it was clear that the other shops did not address the real reason the 3 replacement starters made noise and eventually quit working.

When we replace a flywheel, we almost always use an “OE” original equipment part. Aftermarket flywheels have caused us big problems in the past. If an OE part is available that’s what we use. The same can be said about starters, OE is best.

Not all aftermarket parts are bad parts, but when it comes to starters and flywheels you do not want to just use the cheapest parts.

Going cheep can lead to repetitive repairs.

Fix it right, Fix it once ~ HeyAnthonyAz.com

 

 

 

Cheap Parts & Service = Poor Satisfaction!

Posted on by

The bitterness of “poor quality” lingers long after the sweetness of “low price” is forgotten: Ben Franklin

Fixing your vehicle does not have to break the bank. When a vehicle repair has good value, the cost of the repair is not a huge issue any longer. We use quality parts plus offer a solid warranty. Our goal is to offer vehicle repairs that have value and prevent breakdowns.

Knowing you get what you pay for. Haggling about the labor and using the cheapest parts possible to save money is asking for trouble. Sitting at the side of the road waiting for a tow truck is no fun.

We offer quality repairs with value. All repairs we do must stand up to our 2 year / 24,000 mile warranty. As an independent repair shop we use many dealer parts. The dealer parts fit correctly, and exceed our 2 year / 24,000 mile warranty. The aftermarket parts we use must “fit and function” just like the original equipment dealer parts we install.

Some clients will ask if we can find less expensive parts, and we say yes we can, but the part warranty may not be 2 years / 24,000 miles.

The warranty will be what the parts manufacturer offers, and you get no labor coverage. Our job is to show you the value of doing the repair correctly the first time.

“Fix my car as cheap as you can, Blah, Blah, I am selling it next week.”

Some aftermarket parts may only have a 90 day warranty. Granted most parts should last at least 90 days, but if the part goes bad you get to pay labor again, even if the part has a warranty.

For Example: A car owner goes to a quick lube shop for a 14.95 oil change, and the shop strips the threads out of the oil pan. Anyway you look at this, your cheap oil change just turned into a big mess. Our standard oil change out the door is about $41.00 but it has good value. We do not shortcut the job, just to get it out the door. We spend up to 45 minutes on your vehicle, looking for things that may cause you a break down. If we find issues that need repair, we show you what we found, and we give you prices. We help you plan for your maintenance needs.

For Example: Brake pads have one of the biggest issues with quality vs price. If you go to the dealer, they will only offer one part for your model car, and the price will be high, but the parts fit and work correctly. Now go to an aftermarket parts house, and they may have 5 to 10 different brands of brake pad, all at different prices. Some may work good but make noise, others may wear fast or worse not stop the car correctly. With aftermarket parts you must be selective.

Some aftermarket parts work very good, and if you know what works well, then it’s easy to offer the savings to the client. Our job is to know what works and offer the client the best repair.

For Example: Belts, Hoses and Water pumps have a wide range of price and quality. If I am looking for a belt in the aftermarket, and I can get Bando or Dayco I am happy. I know they are brands that last a long time. For Hoses, I look for the best fit, and rubber quality. The parts quality, affects its service life. A long service life keeps you from having to visit the shop over and over. For Water Pumps, I turn to the dealer 60% of the time, because they just last so much longer.

Fixing your vehicle correctly will reduce how many times you need to visit the repair shop each year. If you own 3 or more cars, you can see how important it is to fix it right the first time. Anyway, It’s not that we don’t want to see you again. We want our clients to be happy they used our services.

We are here to help, we fix sick cars!

With today’s vehicle’s, you visit the repair shop less often, but it feels like the repairs cost more, and more when you visit your mechanic.

Going to the “car doctor” is not on anyone’s top ten list, but when your vehicle breaks down, you know you’re going to spend money.

Preventing breakdowns is what we do. Keeping you informed of your vehicle’s condition let’s you save when faced with bigger repairs. Helping you keep your vehicle in good condition, and preventing breakdowns is our goal.

cropped-heyanthonyaz.com-oil-change-display-nissan1.jpg

We like our clients to visit the shop for service at least every 5,000 miles of driving or once every 4 months. Many things can happen in 4 months of driving. Our clients are always welcome to stop by in between vehicle servicings, for fluid top offs and airing up the tires.

Fix it right, Fix it once.  HeyAnthonyAz.com

Can I bring my own parts?

Posted on by

When you go to a restaurant, do you bring your own food?

Every month, I have at least 5 people ask if we will install a part they bring in.

Our answer is no.

   It’s not that we do not want to put on your parts. It’s because of the warranty. If we sell you the part, it will come with a 2 year 24,000 mile warranty, and labor is covered 100%

If you bring in your own part, you get no warranty with us, and if the part fails, you pay the labor again to replace the part a second time.

Do we bent the rule? Some times. We have installed clients parts, depending on what the part is, and if it’s for a specialty reason like a classic car or super hard to find part, but they must sign a waiver, stating they understand the repair comes with no warranty, parts or labor.

Think about it, do you save that much?

Fix it right, Fix it once. HeyAnthonyAz.com

The Repair you need today.

Posted on by

 

heyanthonyaz.com bent tubes on fuel pump

Short cuts, compromises, and fix it cheep. Too many clients are asking for what they don’t want.

70% of the clients I work for, know first hand what it means to do the job right.

Lately, I have had an increase in walk in clients that want a cheep repair, but they also want a full warranty? This is not a client, it’s A person with A broken car.

Using top quality parts that come with a 2 year or 24,000 mile warranty is very important to us. Keep in mind that A bad repair will be talked about 100 times more often than a repair done the correct way.

At Tony’s we look at a car one of three ways. Does the client want to have a like new OE repair using all dealer parts. Does the clients want a high quality aftermarket parts. Or will the client just want to fix the part that is broken and nothing else.

A Tony’s we focus on the now. What do you need now, to get your car on the road.

All other repairs needed are estimated and we tell you what needs to be done. We break it down in months and by miles. We will not force you to repair your car with us. We want you to feel happy you used our shop for your repair needs. If you own a car or truck it will need repairs and service. We want you as our client, but the only way that will happen is if we do the repair the right way, not the cheep way.

The image at the top, is a fuel pump unit that was installed in flagstaff one week prior to the truck being towed into our shop with a no start condition. The pump failed because of handling and the changes done to the metal pipes. The client was very mad and had nothing good to say about the shop in Flagstaff.

We called the shop. I found out that the correct repair was offered but the client wanted to use a budget part that needed to be adjusted to make it fit. The Flagstaff shop should have said no, but they did the repair anyway. Now they have one more angry person saying ugly things about them, even though the client guided the repair. The outcome was bad, due to a shop compromise and a fix it cheep attitude.

Fix it right, fix it once. HeyAnthonyAz.com 2015

Helping a friend

Posted on by

Recently when helping a friend with an issue that they had, a problem came up. Poor communications caused a falling out. Communication is just that, and sending information via email or texts is no way to solve any issue. I am a detective and when talking to a person on the phone, I will have Q&A that will help sort out the real issues from the garbage.

I have people ask me all the time for help with an automotive problem they have. They want free advice, or they think it will be cheaper because they know me. I try to get everyone to visit the shop, so I can look at the vehicle properly. In many cases I do not charge to look at the issue at hand.

At my shop we do not charge for inspecting the vehicle if you do the repair on the same visit.

Everyone lies about whats happening with their car, it may be a small white lie, or it could be a big lie to cover up a mistake they made when trying to repair the car on their own.

Being deceptive does not save you money on the repair!

The vehicle will tell the truth, and I talk to cars all the time. The car will not hide whats wrong. It’s broken and need repair. That is why I want to look at the vehicle. Testing and getting reading from the vehicle will tell me what repairs are needed, and it will be 100% correct.

When some one wants a price for a repair sight-un-seen, it’s a guess. So, if I give someone a repair quote without inspecting the vehicle it will always be higher than normal. Brake repairs are the most commonly asked questions. The range of pricing is so wide, its scary.

Guessing at the repairs needed will cause big issues. Bring your vehicle in and let’s inspect the issue the right way, so the correct repair is done right the first time.

Heyanthonyaz.com 2015

FREE Oil Change Monthly Drawing at Tony’s

Posted on by

~~~~~~~~~~~~~~~ FREE OIL CHANGE @ TONY’S ~~~~~~~~~~~~~~~~~

It’s time to change the oil!

Enter to win! Win a free oil change, enter your information @ Tony’s contact page.

Enter your contact information on Tony’s contact page & in the message box type “Free oil change monthly drawing” and include the make, model and year of your car.

You will be automatically entered into the drawing for the next months free oil change drawing. Enter as often as you like. The winner of the free oil change will be contacted by Tony’s at the end of each drawing month. The free oil change offer will be running till December 2015

The oil change includes, up to 5 qt’s of 10w30 synthetic blend oil, an oil filter, and under hood fluid top off’s, plus a vehicle safety inspection. This is a $30.00 value at our regular price & a great saving if you win it for free. So enter today, it’s easy and free.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

HeyAnthonyAZ.com 2014 ~ It’s all good under the hood…

Rent a car for your small trip.

Posted on by

Ryan has a 9-year-old Pontiac G6 GT with 218,000 miles. The car is not road ready. It is not ready to take an 800 mile trip at high speeds. Taking a long road trip in a car that needs many repairs and could leave you stranded at the side of the road.

Waiting for a tow truck is no fun.

Ryan is heading out-of-town for a 4 day weekend in Las Vegas. Renting a car is a great idea for a small weekend trip. Ryan’s car needs 1,800.00 of basic mechanical repairs. Plus his vehicle also needs tires. New tires will set Ryan back another 1000.00 bucks.

Ryan has been a client for many years and I did not want to see Ryan have issues out on the road.

Without a doubt, Ryan’s car needs many repairs, but what else could fail on a long road trip? It’s hard to know what could go wrong out on the road.

We offered Ryan a rental with an upgrade to a Lincoln for his long trip. Ryan is going to travel in style and his G6 GT is going to be getting the repairs it has needed for many months. When Ryan gets back to town his car will be ready to go.

The idea is to let the rental car take the beating. Driving out-of-town at high speeds, up hills with the AC cranked on high is a lot of stress for any car, so let the rental take the beating and save your ride for the easy in-town driving.

It’s all good under the hood, heyanthonyaz.com 2014

 

Adjust it till it fits?

Posted on by

Hack Jobs Happen…

I see some crazy short cut repairs (hack jobs). “Hack jobs” by owners, shade tree mechanics and approved auto repair shops. Then I wonder why, why try, why risk a comeback. Why take the short cut in the first place. Why risk loosing a client when the hack job fails, leaving the vehicle owner stranded on the side of the road.

A hack job will fail, it’s a sub-standard repair.

 

Today I had an odd repair issue pop into the shop. Ronda had a fuel pump replaced on her 1995 Chevy Suburban about 30 days ago in Sedona Arizona. The truck has a 5.7 TBI fuel injected engine. (Throttle Body Injection System) Ronda only had one issue with the repair, the fuel economy was reduced by 30 to 40% and this was noticed right after the pump was installed. The shop that installed the pump had double checked the fuel system, and said nothing was wrong.

Ronda had moved to Sedona last year.

The client (Ronda) use to live right around the corner from our shop, but had moved to Sedona in 2013. Ronda happened to be in the valley for some doctors visits, so Ronda stopped in to see if we had time to look at this issue.

Testing showed the fuel system was running too rich. The scan tool (a computer that talks to the car’s computer) showed that the PCM (the car’s computer) was subtracting a lot of fuel. The engine computer uses a pair of fuel trim ratio numbers to display fuel system compensation (larger number = more fuel added to the engine Or a smaller number = less fuel, fuel reduced to the engine). A repair technician can view the fuel trim numbers “live” as they update (in real-time) and watch how the system is operating, rich, lean or normal.

Next I attached a gauge used to test fuel pressure to the engine’s fuel system. The fuel pressure gauge showed that the fuel system pressure was around 19 PSI of pressure. (Why?) The TBI system specification is 9 to 12 PSI. So why was the PSI so high?

I suspected it had the wrong fuel pump installed. So, I removed the fuel pump and found a big mess. What I found was a major issue, the person that did the repairs, must have had a huge loss of reasoning. The part was clearly the wrong part for the truck. When I entered the pump part number into a parts jobber, part interchange system. I discovered the part was the wrong pump for the truck.

The shop decided to adjust the wrong part till it would fit in the tank. But wait, that’s not all. The pump was for a 1996 5.7 MPI engine. (Multi Port Injection System) not a 1995 5.7 TBI system. The 1996 MPI system runs at 60 to 66 PSI. This is clearly too much pressure for the system to handle. To bleed off the high PSI. The shop that made the repairs, had removed the hose clamp to the PSI fuel coupling hose that connects the fuel pumps outlet pipe to the metal pipe going out to the engine’s fuel injector’s. Plus the old fuel pump harness was installed on the new pump, and the electrical connector had a broken retaining clip.

The adjustments and compromises should have never happened, but they did.

Just buy the correct part, and if the part arrives wrong, get the correct part. The correct part was available in Flagstaff, less than a 2 hour round trip from Sedona. The client had already waited 5 days, what was one more day to get the right part.

We fixed the truck and it is running correctly, with the correct part. The client is happy and the mileage is back to normal. Plus Ronda will be bringing her truck to us when ever she is in town every 3 to 4 months.

Keeping up on the needs of an older vehicle may seem costly, but if you do the math. The right older vehicle can be cost-effective in the long run. Every vehicle needs repairs someday, new or old.

It’s all good under the hood, heyanthonyaz.com 2014